Skip to main content

Thermal Management of Electronic Circuitry

More About ElectroCool
Contact Engineered Fluids

Engineered Fluids’ ElectroCool Coolants can cool any type of electronic circuitry or optical device.  No protective coatings are required on circuitry; ElectroCool is compatible with all circuit board and component materials.  

Immersed Circuit Board using Single-Phase Liquid Immersion Cooling
Close-up of a large black studio microphone on a stand in a dark room with blue-lit screens in the background.
Large beige satellite dish and generator on a flatbed trailer in a rural mountainous area with cloudy skies.
High Powered, Hot Circuitry

Amplifier circuitry of every type have one thing in common:  Higher power and higher temperatures.  Thermal Management with Immersion Cooling can solve these problems.  Customers report that ElectroCool Coolants have enabled them to get “three times the power in half the size”, compared with air cooling.

LEDs, LASERS and Optical Devices

Because of its Optical Clarity, ElectroCool Coolants are used for thermal management of a variety of LASER and High-Powered LEDs for both commercial and military applications.

RF and Microwave Transmission

ElectroCool Fluids have excellent RF transmission characteristics.  ElectroCool Coolants exhibit no attenuation of RF or Microwave signal from CW to 20 GHz.  ElectroCool’s Dielectric Constant is almost flat across this spectrum, too.  This opens applications such as antenna cooling and radome flooding.

Photo of Engineered Fluids Branded Single-Phase Liquid Immersion Cooled Electric Vehicle cooled with AmpCool Dielectric Coolants.
EV Using SLIC with AmpCool Dielectric Coolant
Photo of Engineered Fluids Branded Single-Phase Liquid Immersion Cooled Electric Vehicle cooled with AmpCool Dielectric Coolants.